Skip to main content
Ameerpet, Hyderabad · Classroom & live online
Cloud Soft Solutions

Juniper JNCIS-SEC JN0-336 Exam Guide 2026: IDP, IPsec VPN, ATP Cloud, Chassis Cluster, SSL Proxy, SRX Configs, 6-Week Plan and 15 Questions

Juniper JNCIS-SEC (JN0-336): 65 questions in 90 minutes on Junos OS 24.4. The seven objective areas from Juniper's page, SRX route-based VPN and chassis cluster configuration, a 6-week lab plan and 15 practice questions.

Juniper JNCIS-SEC JN0-336 security specialist exam guide banner
Last updated · 6 min read · 1,266 words

Juniper JNCIS-SEC JN0-336 security specialist exam guide banner

JNCIS-SEC (Security, Specialist, exam JN0-336) is the second level of Juniper's security track, after JNCIA-SEC. It covers the advanced features of SRX Series firewalls: intrusion detection and prevention (IDP), IPsec VPNs and Juniper Secure Connect, Juniper ATP Cloud, chassis cluster high availability, identity-aware policies with JIMS, SSL proxy and Junos Space Security Director. Network security engineers at banks, telecoms, MSSPs and data centres in Hyderabad manage SRX firewalls, and JNCIS-SEC shows you can run them in production.

This guide follows Juniper's official JNCIS-SEC certification page. It covers the exam facts, all seven objective areas, SRX configuration for a route-based VPN and a chassis cluster, a 6-week plan and 15 original practice questions.

Quick facts (Juniper, November 2026)

ItemDetail
Exam codeJN0-336
PrerequisiteJNCIA-SEC
Questions65 multiple choice
Duration90 minutes
Software versionJunos OS 24.4
DeliveryPearson VUE, English only; pass or fail shown immediately
Validity3 years
Recommended trainingJuniper Security

Read the official JNCIS-SEC page and check the current price on Pearson VUE.

Exam objectives

ObjectiveWhat to know
Intrusion Detection and Prevention (IDP)IDP signature database management; IDP policies; configuring, monitoring and troubleshooting IDP
IPsec VPNTunnel establishment (IKE phases), traffic processing, site-to-site VPNs, Juniper Secure Connect for remote access; configuration and troubleshooting
Juniper ATP CloudSupported file types, components, security feeds, traffic remediation, workflow, Encrypted Traffic Insights, DNS and IoT security, adaptive threat profiling
High availability clusteringHA features, deployment requirements, chassis cluster operation, real-time object and state synchronisation
Identity-aware security policiesJuniper Identity Management Service (JIMS), ports and protocols, data flow
SSL proxyCertificates; client protection (forward proxy) and server protection (reverse proxy)
Security DirectorDeployment options, onboarding devices, managing security policies

SRX configuration to practise

A route-based site-to-site IPsec VPN with IKEv2:

set interfaces st0 unit 0 family inet
set security zones security-zone untrust interfaces ge-0/0/0.0 host-inbound-traffic system-services ike
set security zones security-zone vpn interfaces st0.0

set security ike proposal IKE-P authentication-method pre-shared-keys dh-group group14 authentication-algorithm sha-256 encryption-algorithm aes-256-cbc
set security ike policy IKE-POL proposals IKE-P pre-shared-key ascii-text "<use-a-strong-secret>"
set security ike gateway GW-BRANCH ike-policy IKE-POL address 203.0.113.2 external-interface ge-0/0/0.0 version v2-only

set security ipsec proposal IPSEC-P protocol esp encryption-algorithm aes-256-gcm
set security ipsec policy IPSEC-POL proposals IPSEC-P
set security ipsec vpn VPN-BRANCH bind-interface st0.0
set security ipsec vpn VPN-BRANCH ike gateway GW-BRANCH ipsec-policy IPSEC-POL
set security ipsec vpn VPN-BRANCH establish-tunnels immediately

set routing-options static route 10.20.0.0/16 next-hop st0.0

# security policies from trust to vpn (and back) are also required
show security ike security-associations
show security ipsec security-associations
show security ipsec statistics

A chassis cluster (run the first command in operational mode on each node, then commit on the primary):

set chassis cluster cluster-id 1 node 0 reboot     # on node 1: node 1

set chassis cluster reth-count 2
set chassis cluster redundancy-group 0 node 0 priority 200
set chassis cluster redundancy-group 0 node 1 priority 100
set chassis cluster redundancy-group 1 node 0 priority 200
set chassis cluster redundancy-group 1 node 1 priority 100
set chassis cluster redundancy-group 1 interface-monitor ge-0/0/3 weight 255
set interfaces reth0 redundant-ether-options redundancy-group 1
set interfaces reth0 unit 0 family inet address 10.1.1.1/24

show chassis cluster status
show chassis cluster interfaces

Redundancy group 0 controls which node's Routing Engine is primary. Redundancy groups 1 and above control the reth interfaces that carry traffic. Real-time objects and session state are synchronised over the fabric link, so sessions survive a failover.

6-week study plan

WeekFocusLab (two or three vSRX instances in EVE-NG or GNS3)
1Review JNCIA-SEC zones, policies and NAT; IDP database and policiesDownload the IDP database and apply a recommended policy
2IPsec: IKE phases, proposals, route-based vs policy-based VPNs; Juniper Secure ConnectBuild the route-based VPN above and troubleshoot a deliberate proposal mismatch
3Juniper ATP Cloud: components, feeds, workflow, ETI, DNS and IoT security, adaptive threat profilingRead the ATP Cloud documentation and draw the file inspection workflow
4Chassis cluster: requirements, control and fabric links, redundancy groups, interface monitoring, failoverBuild a two-node vSRX cluster and fail over redundancy group 1
5Identity-aware policies with JIMS; SSL forward and reverse proxy and certificatesConfigure SSL forward proxy with a lab CA certificate
6Security Director deployment, onboarding and policy management; practice examsReview all objectives against the official page; book the exam

15 practice questions with answers

These are original questions written for this guide, not exam questions.

1. What must you keep up to date for IDP to detect new attacks?
The IDP signature database.

2. Which IKE phase builds the secure channel used to negotiate IPsec SAs?
Phase 1 (the IKE SA).

3. Route-based vs policy-based VPN?
Route-based VPNs bind the tunnel to an st0 interface and send traffic by routing; policy-based VPNs select traffic with a security policy that references the VPN.

4. A tunnel stays down and the IKE SA never forms. What do you check first?
Reachability of the peer, IKE allowed as host-inbound traffic on the external zone, and matching IKE proposals, version, gateway address and pre-shared key.

5. What is Juniper Secure Connect?
Juniper's remote-access VPN client for connecting users to an SRX.

6. What does Juniper ATP Cloud do with unknown files?
It analyses them in the cloud and returns a verdict, so the SRX can block malicious files and infected hosts.

7. What does Encrypted Traffic Insights detect?
Threats in encrypted traffic by analysing traffic patterns and metadata, without decrypting it.

8. What is the role of the control link in a chassis cluster?
It carries heartbeats and control traffic between the two nodes' Routing Engines.

9. What does the fabric link carry?
Real-time object and session state synchronisation, and data traffic that has to cross between nodes.

10. What does redundancy group 0 control?
Which node's Routing Engine is primary.

11. How does interface monitoring trigger a failover?
When monitored interfaces fail, their weights are subtracted from the redundancy group's threshold of 255; at zero, the group fails over.

12. What does JIMS provide to the SRX?
User and device identity collected from sources such as Active Directory, so policies can match users and groups instead of IP addresses.

13. SSL forward proxy vs reverse proxy?
Forward proxy inspects users' outbound HTTPS to the internet (client protection); reverse proxy inspects inbound HTTPS to your own servers (server protection).

14. Why must clients trust the SRX's CA certificate for SSL forward proxy?
The SRX re-signs server certificates, so clients would see certificate errors unless they trust its CA.

15. What is Junos Space Security Director used for?
Central management of security policies across many SRX devices.

Before and after JNCIS-SEC

Cloud Soft Solutions in Ameerpet, Hyderabad teaches network security, cyber security and cloud with real-time projects. See the APEX program and all courses.

📞 Call +91 96660 19191 · WhatsApp · Flat No. 513, 5th Floor, Nilagiri Block, Aditya Enclave, Ameerpet, Hyderabad

Frequently Asked Questions

What is the JNCIS-SEC exam code?
JN0-336.

How many questions are in JN0-336?
65 multiple-choice questions in 90 minutes.

What is the prerequisite for JNCIS-SEC?
JNCIA-SEC.

Which Junos version is JN0-336 based on?
Junos OS 24.4.

How long is JNCIS-SEC valid?
Juniper certifications are valid for three years.

What does JNCIS-SEC cover?
IDP, IPsec VPN and Juniper Secure Connect, Juniper ATP Cloud, chassis cluster high availability, identity-aware policies with JIMS, SSL proxy and Security Director.

Share𝕏inf✉
EnrollWhatsAppCall us