Skip to main content
Ameerpet, Hyderabad · Classroom & live online
Cloud Soft Solutions

Juniper JNCIA-Junos (JN0-106) Exam Guide 2026: 7 Objective Areas, Junos CLI, Commit Model, Routing Policy, 4-Week Plan and 15 Questions

Juniper JNCIA-Junos (JN0-106): 65 multiple-choice questions in 90 minutes, Junos OS 21.2, no prerequisites, valid 3 years. The seven objective areas from Juniper's exam page, the Junos commit model and CLI commands, a Routing Engine protection filter, route preferences, a 4-week lab plan and 15 practice questions.

Juniper JNCIA-Junos JN0-106 exam guide 2026, Cloud Soft Solutions
Last updated · 6 min read · 1,240 words

Juniper JNCIA-Junos JN0-106 exam guide 2026, Cloud Soft Solutions

JNCIA-Junos (exam JN0-106) is Juniper Networks' entry-level certification for Junos OS, the operating system on Juniper routers, switches and SRX firewalls. Juniper equipment is common in Indian telecom operators, ISPs, data centres and large enterprises, and network support roles often ask for "Cisco or Juniper" skills. JNCIA-Junos is the Juniper counterpart to CCNA. It covers networking basics, Junos architecture, the CLI and its commit model, basic configuration, monitoring, static routing, routing policy and firewall filters. It is also the first step on Juniper's enterprise, service provider and security tracks.

This guide follows Juniper's official JNCIA-Junos exam page. It covers the exam facts, the seven objective areas, the Junos CLI habits you need, a 4-week plan and 15 original practice questions.

Quick facts (Juniper, November 2026)

ItemDetail
ExamJNCIA-Junos, JN0-106
Questions65 multiple choice
Duration90 minutes
DeliveryPearson VUE, English
Software versionJunos OS 21.2
PrerequisitesNone
Validity3 years, then recertify
ResultPass/fail shown immediately after the exam
PriceCheck the exam page or Pearson VUE for current India pricing

Read the official JNCIA-Junos exam page and the Junos OS documentation.

Exam objectives (summarised)

AreaWhat it covers
Networking fundamentalsCollision and broadcast domains; switches vs routers; Ethernet; Layer 2 and Layer 3 addressing; IPv4 and IPv6; subnetting and binary; longest-match routing; class of service; connection-oriented vs connectionless protocols
Junos OS fundamentalsSoftware architecture; control and forwarding planes; the Routing Engine (RE) and Packet Forwarding Engine (PFE); transit vs exception traffic
User interfacesCLI modes and navigation; help; filtering output with pipes; active vs candidate configuration; rollback; comparing and managing configuration files; J-Web basics
Configuration basicsFactory-default and initial setup; users, login classes and authentication; interfaces; configuration groups; NTP, SNMP and syslog; configuration archival; tracing; rescue configuration
Operational monitoring and maintenanceshow and monitor commands; interface statistics and errors; ping, traceroute, Telnet and SSH; installing and upgrading Junos; power-on and shutdown; root password recovery
Routing fundamentalsRouting vs forwarding tables; route preference; routing instances; static routes; when to use dynamic routing
Routing policy and firewall filtersDefault and custom routing policies; import and export policies; terms, match conditions and actions; firewall filter structure and actions; unicast RPF

Junos CLI habits you need

Junos works differently from Cisco IOS. Changes go into a candidate configuration and take effect only when you commit. Junos keeps up to 50 earlier configurations that you can roll back to.

user@r1> configure                              # operational mode -> configuration mode
[edit]
user@r1# set system host-name r1
user@r1# set interfaces ge-0/0/0 unit 0 family inet address 10.0.12.1/30
user@r1# set routing-options static route 0.0.0.0/0 next-hop 10.0.12.2
user@r1# show | compare                        # diff candidate vs active
user@r1# commit check                          # validate only
user@r1# commit confirmed 5                    # auto-rollback in 5 min unless confirmed
user@r1# commit                                # confirm
user@r1# rollback 1                            # load the previous configuration
user@r1# run show route                        # operational command from config mode

user@r1> show interfaces terse | match ge-
user@r1> show route 10.0.12.0/30 exact
user@r1> monitor interface ge-0/0/0
user@r1> request system configuration rescue save

A simple firewall filter that protects the Routing Engine:

set firewall family inet filter PROTECT-RE term SSH from source-address 192.0.2.0/24
set firewall family inet filter PROTECT-RE term SSH from protocol tcp
set firewall family inet filter PROTECT-RE term SSH from destination-port ssh
set firewall family inet filter PROTECT-RE term SSH then accept
set firewall family inet filter PROTECT-RE term ICMP from protocol icmp
set firewall family inet filter PROTECT-RE term ICMP then accept
set firewall family inet filter PROTECT-RE term DENY then discard
set interfaces lo0 unit 0 family inet filter input PROTECT-RE

A real filter must also allow the routing protocols, NTP and SNMP traffic the device needs. A filter ends with an implicit discard, so test with commit confirmed to avoid locking yourself out.

Default route preferences to remember: direct 0, local 0, static 5, OSPF internal 10, RIP 100, OSPF external 150, BGP 170. Lower wins.

4-week study plan

WeekFocusLab (vJunos or vSRX in EVE-NG/GNS3, or Juniper vLabs)
1Networking fundamentals, subnetting, IPv6; Junos architecture (RE, PFE)Subnet 20 practice networks by hand
2CLI, candidate vs active, commit options, rollback, J-Web; initial configuration and usersBuild a router from factory default; practise commit confirmed and rollback
3System services (NTP, SNMP, syslog), monitoring, upgrades, rescue config, root recoverySave a rescue config; recover the root password in the lab
4Static routing, routing instances, preference; routing policy and firewall filters; reviewThree routers with static routes and an RE-protect filter; book the exam

15 practice questions with answers

These are original questions written for this guide, not exam questions.

1. Which Junos component runs the routing protocols and the CLI?
The Routing Engine (control plane).

2. Which component forwards transit packets?
The Packet Forwarding Engine (forwarding plane).

3. What is exception traffic?
Packets that the PFE sends to the RE, such as traffic addressed to the device itself or packets needing special handling.

4. When do configuration changes take effect in Junos?
After a successful commit.

5. Which command shows the difference between candidate and active configuration?
show | compare.

6. What does commit confirmed 5 do?
Applies the change but rolls back automatically after 5 minutes unless you commit again.

7. How do you run an operational command from configuration mode?
Prefix it with run.

8. What is the rescue configuration for?
A known-good configuration you can load quickly if the active one breaks access.

9. Which route preference does Junos give static routes by default?
5.

10. What is longest-match routing?
When several routes match, the one with the longest prefix (most specific) is used.

11. What is the difference between the routing table and the forwarding table?
The routing table (on the RE) holds all learned routes; the forwarding table (on the PFE) holds only the active routes used to forward packets.

12. Import vs export routing policy?
Import controls what goes into the routing table from a protocol; export controls what is advertised out.

13. What happens to traffic that matches no term in a firewall filter?
It is discarded by the implicit final discard.

14. Where do you apply a filter to protect the Routing Engine?
As an input filter on the loopback interface lo0.

15. What does unicast RPF check?
That a packet arrived on the interface the router would use to reach its source address, which blocks spoofed sources.

Before and after JNCIA-Junos

Cloud Soft Solutions in Ameerpet, Hyderabad teaches cloud networking, DevOps and security with real-time projects. See the APEX program and all courses.

📞 Call +91 96660 19191 · WhatsApp · Flat No. 513, 5th Floor, Nilagiri Block, Aditya Enclave, Ameerpet, Hyderabad

Frequently Asked Questions

What is JNCIA-Junos?
Juniper Networks' entry-level Junos OS certification, earned by passing exam JN0-106.

How many questions are in JN0-106 and how long is it?
65 multiple-choice questions in 90 minutes.

Which Junos version does the exam use?
Junos OS 21.2.

Are there prerequisites for JNCIA-Junos?
No.

How long is JNCIA-Junos valid?
3 years, after which you recertify.

Is JNCIA-Junos like CCNA?
Yes, it is Juniper's entry-level networking certification, comparable to Cisco's CCNA, but focused on Junos OS.

Share𝕏inf✉
EnrollWhatsAppCall us