Skip to main content
Ameerpet, Hyderabad · Classroom & live online
Cloud Soft Solutions

Cisco SNCF 300-710 v1.2 Exam Guide 2026: Secure Firewall FTD and FMC, IPS Modes, HA, Policies, Packet Tracer, Integrations, 6-Week Plan and 15 Questions

Cisco SNCF 300-710 v1.2: a 90-minute CCNP Security concentration exam on Secure Firewall Threat Defense and Management Center. The four domains and weightings from Cisco's official PDF, what changed from v1.1, FTD CLI troubleshooting commands, a 6-week plan and 15 practice questions.

Cisco SNCF 300-710 v1.2 Secure Firewall exam guide banner
Last updated · 6 min read · 1,278 words

Cisco SNCF 300-710 v1.2 Secure Firewall exam guide banner

SNCF (exam 300-710), Securing Networks with Cisco Firewalls v1.2, is a concentration exam for CCNP Security. Pass it together with the SCOR core exam to earn CCNP Security; on its own it earns the Cisco Certified Specialist – Network Security Firepower. It covers Cisco Secure Firewall Threat Defense (FTD) managed by Secure Firewall Management Center (FMC): firewall and IPS modes, high availability, access control and intrusion policies, NAT and VPN, troubleshooting with packet captures and Packet Tracer, and integrations such as Secure Endpoint, XDR, pxGrid and Splunk. Firewall engineers who know FTD are needed in SOC and network security teams across Hyderabad.

This guide follows Cisco's official SNCF v1.2 exam topics PDF. It covers the exam facts, the four domains and their weightings, what changed from v1.1, FTD CLI troubleshooting commands, a 6-week plan and 15 original practice questions.

Quick facts (Cisco, November 2026)

ItemDetail
ExamSecuring Networks with Cisco Firewalls v1.2 (SNCF 300-710)
Duration90 minutes
CertificationsCCNP Security (with SCOR 350-701); Cisco Certified Specialist – Network Security Firepower
PriceUS$300 (Cisco's price for CCNP concentration exams; confirm when you book)
DeliveryPearson VUE, at a test centre or online
ProductsSecure Firewall Threat Defense, Secure Firewall Management Center, Device Manager, Security Cloud Control

Read the official SNCF v1.2 exam topics (PDF). Compared with v1.1, version 1.2 adds ZTNA under secure access, firewall engine debug and system support trace as troubleshooting tools, event types and the network map in reporting, and Splunk and AI-driven threat intelligence. It replaces SecureX with Cisco XDR, and replaces Cisco Defense Orchestrator and cdFMC with Security Cloud Control Firewall Management.

Exam domains and weightings

DomainWeightWhat it covers
1.0 Deployment30%Routed and transparent firewall modes; passive and inline IPS modes; port channels, failover, ECMP, static route tracking and clustering; virtual appliances and cloud management
2.0 Configuration30%FMC system settings; access control, DNS, identity and network analysis policies; network discovery, application detectors, correlation, Encrypted Visibility Engine; objects and intrusion rules; certificates, platform settings, health policy, NAT, QoS, routing, ZTNA and VPN; Snort in FTD
3.0 Management and Troubleshooting25%FMC GUI and device CLI; dashboards and reports; packet capture, Packet Tracer, firewall engine debug and system support trace; connection, discovery, intrusion, malware and unified events; network map; FMC, FDM and Security Cloud Control
4.0 Integration15%Malware Defense; Secure Endpoint; Threat Intelligence Director; Cisco XDR; pxGrid; Rapid Threat Containment; Security Analytics and Logging; Splunk and AI-driven threat intelligence

FTD CLI troubleshooting commands

# simulate a packet through every rule, NAT and route
packet-tracer input inside tcp 10.1.1.10 51515 203.0.113.5 443 detailed

# capture real traffic, with trace
capture CAP interface inside trace match tcp host 10.1.1.10 host 203.0.113.5 eq 443
show capture CAP
show capture CAP packet-number 1 trace

# why did Snort or the access policy allow or block it?
system support firewall-engine-debug
system support trace

# state, NAT and high availability
show conn address 10.1.1.10
show nat detail
show failover
show cluster info

Packet Tracer simulates a packet, while a capture with trace shows what happened to real packets. Use both: the simulation tells you which rule should match, and the capture proves whether traffic arrives at all.

6-week study plan

WeekFocusLab (FMCv and FTDv in a home lab, CML or Cisco dCloud)
1Routed vs transparent mode; inline, inline tap and passive interfaces; registering FTD to FMC; FDM vs FMC vs Security Cloud ControlRegister an FTDv to FMC and deploy a basic policy
2Access control policy, prefilter, security intelligence, DNS and identity policies; objectsBlock a URL category for one AD group
3Intrusion policies and rules, network analysis policy, Snort 3; network discovery, application detectors, correlation, Encrypted Visibility EngineTrigger an intrusion event and tune the rule
4NAT, routing, QoS, certificates, platform settings, health policy; remote-access VPN and ZTNARemote-access VPN with Secure Client and certificate authentication
5Failover, clustering, port channels, ECMP, route tracking; troubleshooting tools; events and reportsActive/standby failover; fail the active unit and watch the switchover
6Malware Defense, Secure Endpoint, TID, XDR, pxGrid and Rapid Threat Containment, Splunk; reviewMock exam; book the exam

15 practice questions with answers

These are original questions written for this guide, not exam questions.

1. Routed vs transparent mode?
Routed mode acts as a Layer 3 hop with IP addresses on interfaces; transparent mode acts like a Layer 2 bump in the wire, bridging traffic between interfaces.

2. Which IPS mode can drop traffic?
Inline. Passive mode (and inline tap) only sees copies of traffic and can alert but not block.

3. Which policy can fastpath trusted traffic before Snort inspects it?
The prefilter policy.

4. What engine inspects traffic for intrusions in FTD?
Snort (Snort 3 on current releases).

5. Which feature identifies apps in encrypted traffic without decrypting it?
The Encrypted Visibility Engine (EVE), which fingerprints TLS handshakes.

6. What do identity policies add to access control?
User and group information, so rules can match AD users and groups, not only IP addresses.

7. Active/standby failover needs which links between the units?
A failover link, and usually a state link so connections survive the switchover.

8. How does clustering differ from failover?
In a cluster all units pass traffic together for more throughput; in active/standby failover only one unit passes traffic.

9. Which tool shows the path a hypothetical packet would take, including NAT and the matching rule?
Packet Tracer.

10. Which command shows why the access policy allowed or blocked a live connection?
system support firewall-engine-debug (or system support trace for Snort verdicts as well).

11. What was Cisco Security Cloud Control Firewall Management formerly called?
Cloud-delivered Firewall Management Center (cdFMC).

12. Which manager runs on the firewall itself for a single device?
Secure Firewall Device Manager (FDM).

13. What does Threat Intelligence Director do?
It takes third-party threat intelligence feeds (such as STIX/TAXII) and uses their indicators to block or monitor traffic.

14. What does Rapid Threat Containment do?
Uses ISE through pxGrid to quarantine or change access for an endpoint when FMC detects a threat.

15. Which events record each allowed or blocked session?
Connection events.

Before and after SNCF

Cloud Soft Solutions in Ameerpet, Hyderabad teaches network security, cloud security and DevSecOps with real-time projects. See the APEX program and all courses.

📞 Call +91 96660 19191 · WhatsApp · Flat No. 513, 5th Floor, Nilagiri Block, Aditya Enclave, Ameerpet, Hyderabad

Frequently Asked Questions

What is SNCF 300-710?
Securing Networks with Cisco Firewalls v1.2, a CCNP Security concentration exam on Secure Firewall Threat Defense and Management Center.

How long is the SNCF exam?
90 minutes.

What are the SNCF domains?
Deployment 30%, Configuration 30%, Management and Troubleshooting 25%, Integration 15%.

What changed in SNCF v1.2?
It adds ZTNA, firewall engine debug and system support trace, Splunk and AI-driven threat intelligence, and replaces SecureX, Cisco Defense Orchestrator and cdFMC with Cisco XDR and Security Cloud Control.

How do I earn CCNP Security with SNCF?
Pass the SCOR 350-701 core exam and SNCF 300-710.

Does SNCF alone give a certification?
Yes. It earns the Cisco Certified Specialist – Network Security Firepower.

Share𝕏inf✉
EnrollWhatsAppCall us