Skip to main content
Ameerpet, Hyderabad · Classroom & live online
Cloud Soft Solutions

Juniper JNCIS-DevOps JN0-423 Exam Guide 2026: gRPC, gNMI Telemetry, Ansible, Junos Scripts, YANG, 6-Week Plan and 15 Questions

Juniper JNCIS-DevOps (JN0-423): 65 questions in 90 minutes on Junos OS 24.4. The six objective areas from Juniper's page, Ansible, Python commit script and gNMIc examples, a 6-week lab plan and 15 practice questions.

Juniper JNCIS-DevOps JN0-423 automation exam guide banner
Last updated · 5 min read · 1,133 words

Juniper JNCIS-DevOps JN0-423 automation exam guide banner

JNCIS-DevOps (Automation and DevOps, Specialist, exam JN0-423) is the second level of Juniper's automation track, after JNCIA-DevOps. It covers Junos platform automation (MGD- and JSD-based, Terraform, the Juniper Extension Toolkit), gRPC and gNMI for configuration and streaming telemetry with OpenConfig, Ansible for Junos (playbooks, Vault, JSNAPy, Jinja2 templates), Junos automation scripts (commit, op, event and SNMP scripts) and YANG data models. Network automation engineers are in demand at ISPs, cloud providers and GCCs in Hyderabad, and this exam shows you can automate Junos networks beyond the basics.

This guide follows Juniper's official JNCIS-DevOps certification page. It covers the exam facts, all six objective areas, Ansible, Python and gNMI examples, a 6-week plan and 15 original practice questions.

Quick facts (Juniper, November 2026)

ItemDetail
Exam codeJN0-423
PrerequisiteJNCIA-DevOps
Questions65 multiple choice
Duration90 minutes
Software versionJunos OS 24.4
DeliveryPearson VUE, English only; pass or fail shown immediately
Validity3 years

Read the official JNCIS-DevOps page and check the current price on Pearson VUE.

Exam objectives

ObjectiveWhat to know
Platform automation overviewJunos platform automation; management process (MGD-based) automation; Terraform; Juniper Extension Toolkit (JET) service process (JSD-based) automation
gRPCProtocol buffers, the gRPC protocol and OpenConfig for automating Junos with gRPC and gNMI
gRPC telemetryStreaming telemetry with gNMI: sensor paths, OpenConfig, and tools such as gNMIc and the TIG stack (Telegraf, InfluxDB, Grafana)
AnsibleSupported files, playbooks, Ansible Vault, JSNAPy, Jinja2 templates
Junos automation scriptsCommit, op, event and SNMP scripts: concepts, benefits and operation
YANGImplementation concepts, OpenConfig, YANG syntax and data types

Automation examples to practise

Ansible with the Juniper collection (ansible-galaxy collection install juniper.device):

- name: Configure NTP on Junos devices
  hosts: junos
  connection: local
  gather_facts: no
  tasks:
    - name: Collect device facts
      juniper.device.facts:

    - name: Render and merge NTP config from a Jinja2 template
      juniper.device.config:
        load: merge
        template: templates/ntp.j2
        vars:
          ntp_servers: ["10.0.0.10", "10.0.0.11"]
        comment: "NTP via Ansible"

# templates/ntp.j2
# system {
#   ntp {
# {% for s in ntp_servers %}
#     server {{ s }};
# {% endfor %}
#   }
# }

Keep device passwords in Ansible Vault (ansible-vault encrypt group_vars/junos/vault.yml), never in plain text. Use JSNAPy to take snapshots before and after a change and compare them, for example to check that BGP neighbours are still up.

A Python commit script that warns about interfaces without descriptions:

from junos import Junos_Configuration
import jcs

def main():
    for intf in Junos_Configuration.xpath("./interfaces/interface[starts-with(name, 'ge-')]"):
        if not intf.xpath("./description"):
            jcs.emit_warning("Interface %s has no description" % intf.xpath("./name")[0].text)

if __name__ == "__main__":
    main()

# enable it on the device:
# set system scripts language python3
# set system scripts commit file check-desc.py

Streaming telemetry with gNMIc (gRPC enabled on the device, a lab only, without TLS):

gnmic -a 10.0.0.1:32767 -u lab -p '<password>' --insecure \
  subscribe --path "/interfaces/interface[name=ge-0/0/0]/state/counters" \
  --mode stream --stream-mode sample --sample-interval 10s

In production, use TLS for gRPC and send telemetry to Telegraf, InfluxDB and Grafana (the TIG stack) for dashboards.

Script types at a glance: commit scripts check or change configuration at commit time; op scripts add custom operational commands; event scripts run automatically when an event policy matches (for example, a link going down); SNMP scripts provide custom SNMP MIB objects.

6-week study plan

WeekFocusLab (vJunos-router or vMX/vSRX, Python 3, Ansible)
1Review JNCIA-DevOps: NETCONF, XML, XPath, PyEZ, REST API; MGD vs JSD automation, JET, TerraformPull facts and configuration with PyEZ
2YANG syntax and data types, OpenConfig models, Junos YANGView the same configuration as set, XML and JSON with | display
3gRPC, protocol buffers and gNMI for configurationEnable gRPC and read config with gNMIc get
4Streaming telemetry: sensor paths, subscription modes, TIG stackGraph interface counters in Grafana
5Ansible: inventory, playbooks, Vault, Jinja2 templates, JSNAPyTemplate NTP and syslog across three devices; add JSNAPy pre and post checks
6Commit, op, event and SNMP scripts; review all objectives; practice examsWrite a commit script and an op script; book the exam

15 practice questions with answers

These are original questions written for this guide, not exam questions.

1. Which Junos process handles NETCONF and CLI configuration requests?
The management process, MGD.

2. What does the Juniper Extension Toolkit (JET) let you do?
Write off-box or on-box applications that program Junos through APIs served by the JET service process (JSD).

3. What format do gRPC messages use?
Protocol buffers.

4. What is gNMI?
The gRPC Network Management Interface, used to get and set configuration and subscribe to telemetry.

5. Why use OpenConfig models?
They are vendor-neutral YANG models, so the same automation can work across vendors.

6. Streaming telemetry vs SNMP polling?
The device pushes data at set intervals or on change, which scales better and is closer to real time than polling.

7. Which tools make up the TIG stack?
Telegraf, InfluxDB and Grafana.

8. Where should device credentials live in an Ansible project?
In an Ansible Vault encrypted file.

9. What does JSNAPy do?
It takes snapshots of operational state and compares them against tests or other snapshots, for example before and after a change.

10. What does a Jinja2 template add to a playbook?
It generates device configuration from variables, so one template serves many devices.

11. Which script type can reject a commit that breaks a policy?
A commit script.

12. Which script type adds a custom operational command?
An op script.

13. What triggers an event script?
An event policy matching a system event, such as an interface going down.

14. In YANG, what is the difference between a container and a list?
A container groups nodes once; a list holds multiple entries identified by a key.

15. How does Terraform fit Junos automation?
It manages device configuration declaratively through a provider, keeping the desired state in code.

Before and after JNCIS-DevOps

Cloud Soft Solutions in Ameerpet, Hyderabad teaches DevOps, Python, Ansible, Terraform and networking with real-time projects. See the APEX program and all courses.

📞 Call +91 96660 19191 · WhatsApp · Flat No. 513, 5th Floor, Nilagiri Block, Aditya Enclave, Ameerpet, Hyderabad

Frequently Asked Questions

What is the JNCIS-DevOps exam code?
JN0-423.

How many questions are in JN0-423?
65 multiple-choice questions in 90 minutes.

What is the prerequisite for JNCIS-DevOps?
JNCIA-DevOps.

Which Junos version is JN0-423 based on?
Junos OS 24.4.

What does JNCIS-DevOps cover?
Platform automation (MGD, JET, Terraform), gRPC and gNMI, streaming telemetry, Ansible with Vault, JSNAPy and Jinja2, Junos automation scripts and YANG.

How long is JNCIS-DevOps valid?
Juniper certifications are valid for three years.

Share𝕏inf✉
EnrollWhatsAppCall us