Skip to main content
Ameerpet, Hyderabad · Classroom & live online
Cloud Soft Solutions

Juniper JNCIS-DC JN0-481 Exam Guide 2026: EVPN-VXLAN, Apstra Design to Operations, Multitenancy, 6-Week Plan and 15 Questions

Juniper JNCIS-DC (JN0-481): 65 questions in 90 minutes on Apstra 5.1 and Junos 24.4. The seven objective areas from Juniper's page, EVPN route types, the Apstra workflow, a 6-week plan and 15 practice questions.

Juniper JNCIS-DC JN0-481 data center exam guide banner
Last updated · 5 min read · 1,206 words

Juniper JNCIS-DC JN0-481 data center exam guide banner

JNCIS-DC (Data Center, Specialist, exam JN0-481) is the second level of Juniper's data center track, after JNCIA-DC. It covers IP fabrics and EVPN-VXLAN, and how to design, build, deploy and operate them with Juniper Apstra, Juniper's intent-based networking software. Topics include spine-leaf design, EVPN route types, VXLAN, Apstra blueprints, multitenancy with routing zones and virtual networks, data center interconnect and intent-based analytics. Hyderabad's data centres, cloud providers and banks are building EVPN-VXLAN fabrics, and engineers who can run them with automation tools like Apstra are hard to find.

This guide follows Juniper's official JNCIS-DC certification page. It covers the exam facts, all seven objective areas, EVPN and the Apstra workflow explained, a 6-week plan and 15 original practice questions.

Quick facts (Juniper, November 2026)

ItemDetail
Exam codeJN0-481
PrerequisiteJNCIA-DC
Questions65 multiple choice
Duration90 minutes
Software versionsApstra 5.1, Junos 24.4
DeliveryPearson VUE, English only; pass or fail shown immediately
Validity3 years

Read the official JNCIS-DC page and check the current price on Pearson VUE.

Exam objectives

ObjectiveWhat to know
Data center architectures (IP fabrics, EVPN-VXLAN)Spine-leaf design, ECMP, underlay and overlay routing, Juniper best practices; EVPN instances, bridge domains, Ethernet segments, route distinguishers and targets, vrf-import and vrf-export, route types, edge-routed bridging with Type 2 or Type 5; VXLAN control plane, VNI-to-VLAN mapping, VTEPs
Juniper Apstra architectureApstra server, device agents, UI, role-based access control, event log, syslog
Apstra design phaseReference design, interface maps, device profiles, resources, tags, logical devices, rack types, spine capacity planning, templates
Apstra build and deploy phasesDevice management (agents, system IDs), blueprint UI, cable map, device states, deploy modes
Blueprint operationsService vs probe anomalies; dashboard, analytics, staged, uncommitted, active and Time Voyager tabs; querying, tags, changes and reverts; property sets and configlets; root cause identification; virtual networks and connectivity templates; adding racks and generic systems; rendered, incremental and pristine configs
Data center multitenancyConnectivity templates, routing zones and VRFs, routing policy, virtual networks, security policies, VMware integration, data center interconnect
Intent-based analyticsGraph explorer, graph queries, intent-based analytics probes

EVPN route types you must know

TypeNameUsed for
1Ethernet auto-discoveryMultihoming: fast convergence and aliasing for Ethernet segments
2MAC/IP advertisementAdvertising host MAC and IP addresses; edge-routed bridging within a subnet
3Inclusive multicast Ethernet tagBuilding the flooding list for broadcast, unknown unicast and multicast (BUM) traffic
4Ethernet segmentElecting the designated forwarder on multihomed segments
5IP prefixAdvertising IP prefixes between VRFs and to external networks

In an EVPN-VXLAN fabric the underlay (usually EBGP between spines and leaves) gives IP reachability between loopbacks, and the overlay (EVPN signalling over BGP) carries tenant MAC and IP information. VXLAN encapsulates tenant traffic between VTEPs on the leaves, and each VLAN maps to a VNI.

The Apstra workflow

PhaseWhat you do
DesignPick logical devices (port roles and speeds), map them to real hardware with interface maps and device profiles, build rack types, and combine racks and spines into a template
BuildCreate a blueprint from the template; assign resources (ASNs, loopback and link IP pools, VNIs), interface maps and system IDs; review the cable map
DeployCommit the staged changes; Apstra renders and pushes the configuration to the devices through their agents
OperateAdd virtual networks, routing zones and connectivity templates; watch anomalies and intent-based analytics probes; use Time Voyager to roll back to an earlier revision

Apstra compares the live state with your intent all the time. A service anomaly means something doesn't match the intended configuration or state, such as a BGP session that should be up. A probe anomaly comes from an intent-based analytics probe crossing a threshold.

6-week study plan

WeekFocusLab or exercise
1IP fabrics: spine-leaf, ECMP, EBGP underlay; review JNCIA-DCBuild a 2-spine, 2-leaf EBGP underlay with vJunos-switch in EVE-NG or Containerlab
2EVPN: EVIs, Ethernet segments, RD and RT, route types; VXLAN, VNIs, VTEPsAdd an EVPN-VXLAN overlay by hand and inspect Type 2 and Type 3 routes
3Apstra architecture and design phase: logical devices, interface maps, rack types, templatesUse Juniper's Apstra virtual lab or a trial if available; otherwise follow the documentation step by step
4Build and deploy: resources, system IDs, cable map, device states, deploy modesCreate a blueprint and deploy it
5Blueprint operations and multitenancy: virtual networks, routing zones, connectivity templates, configlets, Time Voyager, DCIAdd two tenants with separate routing zones
6Intent-based analytics: graph explorer, queries, probes; review and practice examsCreate a probe and trigger an anomaly; book the exam

15 practice questions with answers

These are original questions written for this guide, not exam questions.

1. Why are spine-leaf fabrics preferred in modern data centres?
Every leaf is the same number of hops from every other leaf, and ECMP spreads traffic across all spines for predictable, scalable bandwidth.

2. What does the underlay provide in EVPN-VXLAN?
IP reachability between VTEP loopback addresses.

3. Which EVPN route type advertises host MAC and IP addresses?
Type 2.

4. Which EVPN route type advertises IP prefixes?
Type 5.

5. What does a route target control?
Which VRFs or EVPN instances import a route.

6. What is a VTEP?
A VXLAN tunnel endpoint that encapsulates and decapsulates VXLAN traffic, usually on the leaf switches.

7. What is a VNI?
The VXLAN network identifier, which identifies a Layer 2 segment in the overlay; VLANs map to VNIs.

8. In edge-routed bridging, where does inter-subnet routing happen?
On the leaf switches, close to the hosts.

9. In Apstra, what is a logical device?
An abstract description of a device's ports, speeds and roles, independent of the hardware model.

10. What links a logical device to real hardware?
An interface map, using the device profile.

11. What is a blueprint?
The running instance of a fabric design, built from a template, that Apstra deploys and keeps checking.

12. What does Time Voyager do?
It lets you view and roll back to earlier blueprint revisions.

13. When would you use a configlet?
To add device configuration that Apstra's reference design doesn't model, such as specific syslog or SNMP settings.

14. What is a routing zone in Apstra?
A VRF that separates tenants' Layer 3 traffic.

15. Service anomaly vs probe anomaly?
A service anomaly means live state doesn't match intent; a probe anomaly comes from an intent-based analytics probe crossing a threshold.

Before and after JNCIS-DC

Cloud Soft Solutions in Ameerpet, Hyderabad teaches networking, cloud and DevOps with real-time projects. See the APEX program and all courses.

📞 Call +91 96660 19191 · WhatsApp · Flat No. 513, 5th Floor, Nilagiri Block, Aditya Enclave, Ameerpet, Hyderabad

Frequently Asked Questions

What is the JNCIS-DC exam code?
JN0-481.

How many questions are in JN0-481?
65 multiple-choice questions in 90 minutes.

What is the prerequisite for JNCIS-DC?
JNCIA-DC.

Which software versions does JN0-481 use?
Apstra 5.1 and Junos 24.4.

What does JNCIS-DC cover?
IP fabrics and EVPN-VXLAN, Juniper Apstra architecture, design, build, deploy and blueprint operations, multitenancy and intent-based analytics.

How long is JNCIS-DC valid?
Juniper certifications are valid for three years.

Share𝕏inf✉
EnrollWhatsAppCall us