
JNCIS-ENT (Enterprise Routing and Switching, Specialist, exam JN0-352) is the second level of Juniper's enterprise track, after JNCIA-Junos. It tests switching (VLANs, spanning tree, Layer 2 security), protocol-independent routing, OSPF, IS-IS, BGP, GRE and IP-IP tunnels, and high availability features such as LAG, Virtual Chassis, GRES, NSR, BFD and VRRP, all on Junos OS. Network engineers at ISPs, data centres, banks and enterprises in Hyderabad use Juniper EX switches and MX and SRX routers, and JNCIS-ENT shows you can configure and troubleshoot them beyond the basics.
This guide follows Juniper's official JNCIS-ENT certification page. It covers the exam facts, all nine objective areas, Junos configuration you should be able to write, a 6-week plan and 15 original practice questions.
Quick facts (Juniper, November 2026)
| Item | Detail |
|---|---|
| Exam code | JN0-352 |
| Prerequisite | JNCIA-Junos |
| Questions | 65 multiple choice |
| Duration | 90 minutes |
| Software version | Junos 23.1 |
| Delivery | Pearson VUE, English only; pass or fail shown immediately |
| Validity | 3 years |
| Recommended training | Junos Intermediate Routing and Junos Enterprise Switching |
Read the official JNCIS-ENT page and check the current price on Pearson VUE.
Exam objectives
| Objective | What to know |
|---|---|
| Layer 2 switching and VLANs | Bridging and frame processing; access and trunk ports, tagging, native and voice VLANs; inter-VLAN routing with IRB interfaces |
| Spanning Tree | STP and RSTP, port roles and states, BPDUs, convergence |
| Layer 2 security | BPDU, loop and root protection; MAC limiting, DHCP snooping, dynamic ARP inspection, IP source guard; MACsec; storm control; Layer 2 firewall filters |
| Protocol-independent routing | Static, aggregate and generated routes; martian addresses; routing instances and RIB groups; load balancing; filter-based forwarding |
| OSPF | Link-state database, packet and LSA types, router ID, adjacencies, DR and BDR, area and router types; configuration, routing policy and troubleshooting |
| IS-IS | Link-state database, PDUs, TLVs, adjacencies, levels and areas, DIS, metrics; configuration and troubleshooting |
| BGP | Operation, message types, attributes, path selection, IBGP vs EBGP; groups and peers, routing policy, troubleshooting |
| Tunnels | GRE and IP-IP: uses, configuration and troubleshooting |
| High availability | LAG, redundant trunk groups, Virtual Chassis, graceful restart, GRES, NSR, NSB, BFD, VRRP, unified ISSU |
Junos configuration to practise
These examples use the Enhanced Layer 2 Software (ELS) syntax used on current EX switches.
# VLANs, access and trunk ports, inter-VLAN routing with IRB
set vlans SALES vlan-id 10 l3-interface irb.10
set vlans ENG vlan-id 20 l3-interface irb.20
set interfaces ge-0/0/1 unit 0 family ethernet-switching interface-mode access vlan members SALES
set interfaces ge-0/0/47 unit 0 family ethernet-switching interface-mode trunk vlan members [ SALES ENG ]
set interfaces irb unit 10 family inet address 10.10.10.1/24
set interfaces irb unit 20 family inet address 10.10.20.1/24
# RSTP with edge ports and BPDU protection
set protocols rstp interface ge-0/0/1 edge
set protocols rstp bpdu-block-on-edge
# OSPF in the backbone area
set protocols ospf area 0.0.0.0 interface ge-0/0/0.0
set protocols ospf area 0.0.0.0 interface lo0.0 passive
# EBGP with an export policy
set routing-options autonomous-system 65001
set policy-options policy-statement EXPORT-LAN term 1 from route-filter 10.10.0.0/16 orlonger
set policy-options policy-statement EXPORT-LAN term 1 then accept
set protocols bgp group ISP type external peer-as 65002 neighbor 192.0.2.2
set protocols bgp group ISP export EXPORT-LAN
# Verify
show ethernet-switching table
show spanning-tree interface
show ospf neighbor
show bgp summary
show route protocol bgp
Remember that Junos routing policy is evaluated term by term, and each protocol has a default policy when nothing matches. For example, BGP by default advertises active BGP routes, and OSPF doesn't export routes from other protocols.
6-week study plan
| Week | Focus | Lab (vJunos-switch and vJunos-router, or vSRX, in EVE-NG or GNS3) |
|---|---|---|
| 1 | Layer 2 switching, VLANs, trunks, IRB; spanning tree | Two switches with three VLANs and inter-VLAN routing; break a link and watch RSTP converge |
| 2 | Layer 2 security: protection features, port security, storm control, Layer 2 filters | Enable DHCP snooping and DAI, then test with a rogue DHCP server |
| 3 | Static, aggregate and generated routes, routing instances, RIB groups, load balancing, filter-based forwarding | Send one subnet's traffic out a second ISP with filter-based forwarding |
| 4 | OSPF and IS-IS | Build multi-area OSPF, then rebuild the same topology with IS-IS levels |
| 5 | BGP: IBGP and EBGP, attributes, path selection, policies; GRE and IP-IP tunnels | Influence path selection with local preference, then AS path prepending |
| 6 | High availability: LAG, RTG, Virtual Chassis, GRES, NSR, BFD, VRRP, ISSU; practice exams | Configure VRRP and BFD and time the failover; book the exam |
15 practice questions with answers
These are original questions written for this guide, not exam questions.
1. Which interface provides Layer 3 routing for a VLAN on an EX switch?
An IRB (integrated routing and bridging) interface.
2. What happens to untagged frames arriving on a trunk port with a native VLAN configured?
They are placed in the native VLAN.
3. Which RSTP port role provides a backup path to the root bridge?
The alternate port.
4. What does BPDU protection do on an edge port?
It disables the port if it receives a BPDU, stopping an unauthorised switch from affecting spanning tree.
5. Which feature stops a rogue DHCP server on an access port?
DHCP snooping, which only trusts DHCP server replies on trusted ports.
6. What does dynamic ARP inspection rely on?
The DHCP snooping binding table, to drop ARP packets with invalid IP-to-MAC bindings.
7. How does a generated route differ from an aggregate route?
A generated route has a real next hop taken from a contributing route; an aggregate route's next hop is reject or discard.
8. What is filter-based forwarding?
Using a firewall filter to send matching traffic to a different routing instance, so it follows a different path than the destination-based route.
9. Which OSPF router type connects an area to the backbone?
An area border router (ABR).
10. What is the IS-IS equivalent of the OSPF designated router?
The designated intermediate system (DIS).
11. Which BGP attribute is shared only inside an AS and preferred when higher?
Local preference.
12. Why do IBGP peers usually peer between loopback addresses?
Loopbacks stay up as long as any path exists, so the session survives a single link failure (with an IGP providing reachability).
13. What does a GRE tunnel let you carry that IP-IP can't?
Non-IPv4 payloads, such as IPv6 or other protocols, because GRE has a protocol type field.
14. GRES vs NSR?
GRES keeps the forwarding plane running when the backup Routing Engine takes over; NSR also preserves routing protocol state so neighbours don't notice the switchover.
15. What does BFD add to OSPF, BGP or VRRP?
Very fast failure detection, so the protocol reacts in milliseconds rather than waiting for its own timers.
Before and after JNCIS-ENT
- Start with JNCIA-Junos; compare with Cisco's CCNA and ENCOR.
- Branch out with JNCIS-SEC, JNCIA-DC or JNCIA-MistAI; automate with JNCIA-DevOps.
- Learn networking and cloud hands-on in our multi-cloud course; see live network engineer jobs.
Cloud Soft Solutions in Ameerpet, Hyderabad teaches networking, cloud and security with real-time projects. See the APEX program and all courses.
📞 Call +91 96660 19191 · WhatsApp · Flat No. 513, 5th Floor, Nilagiri Block, Aditya Enclave, Ameerpet, Hyderabad
Frequently Asked Questions
What is the JNCIS-ENT exam code?
JN0-352.
How many questions are in JN0-352?
65 multiple-choice questions in 90 minutes.
What is the prerequisite for JNCIS-ENT?
JNCIA-Junos.
Which Junos version is JN0-352 based on?
Junos 23.1.
How long is JNCIS-ENT valid?
Juniper certifications are valid for three years.
What does JNCIS-ENT cover?
Layer 2 switching and VLANs, spanning tree, Layer 2 security, protocol-independent routing, OSPF, IS-IS, BGP, tunnels and high availability.



