Skip to main content
Ameerpet, Hyderabad · Classroom & live online
Cloud Soft Solutions

ISTQB CTFL v4.0 Foundation Level Exam Guide 2026: Questions per Chapter, Test Techniques with Examples, 4-Week Plan and 15 Questions

ISTQB CTFL v4.0: 40 questions, 60 minutes (75 in a non-native language), pass mark 26. Official questions per chapter and K-level, worked examples of BVA, equivalence partitioning, decision tables, state transitions and coverage, a 4-week plan and 15 practice questions.

ISTQB CTFL v4.0 Foundation Level exam guide 2026, Cloud Soft Solutions
Last updated · 6 min read · 1,295 words

ISTQB CTFL v4.0 Foundation Level exam guide 2026, Cloud Soft Solutions

ISTQB Certified Tester Foundation Level (CTFL) v4.0 is the most common software testing certification in Indian QA job postings, from manual testers to SDETs. It covers testing fundamentals, testing in Agile and DevOps lifecycles, static testing and reviews, test design techniques (equivalence partitioning, boundary value analysis, decision tables, state transitions, coverage), test management, and tools. It is also the prerequisite for ISTQB's Advanced Level and many Specialist certificates.

This guide uses ISTQB's official exam structure tables: questions per chapter, which chapters need calculation (K3) questions, worked examples of the techniques, a 4-week plan and 15 original practice questions.

Quick facts (ISTQB, exam structure tables v1.18, May 2026)

ItemDetail
SyllabusCTFL v4.0 (current download: v4.0.1)
Questions40 multiple-choice, 1 point each
Pass mark26 of 40 (65%)
Duration60 minutes; 75 minutes for candidates taking it in a non-native language
PrerequisiteNone
Where to bookThrough ISTQB member boards or accredited exam providers (in India, check the Indian Testing Board and authorised providers)

Read the official CTFL v4.0 page and download the syllabus, sample exams and glossary.

Questions per chapter

ChapterQuestionsK1 (remember)K2 (understand)K3 (apply)
1. Fundamentals of Testing8260
2. Testing Throughout the SDLC6240
3. Static Testing4220
4. Test Analysis and Design11065
5. Managing the Test Activities9153
6. Test Tools2110
Total408248

Chapters 4 and 5 make up half the exam and all 8 K3 questions. ISTQB budgets about 3 minutes for each K3 question, so practise the calculations until they're quick.

What's in each chapter

  • 1. Fundamentals: what testing is and why it's needed; testing vs debugging; the seven testing principles; test activities and testware; traceability; roles; the whole-team approach and independence of testing.
  • 2. SDLC: testing in sequential, iterative and Agile models; test-first approaches (TDD, ATDD, BDD); DevOps and shift-left; retrospectives; test levels (component, integration, system, acceptance); functional and non-functional testing; confirmation and regression testing; maintenance testing.
  • 3. Static testing: what can be reviewed; value of early feedback; the review process; review types (informal, walkthrough, technical review, inspection) and roles.
  • 4. Test design: black-box techniques (equivalence partitioning, boundary value analysis, decision tables, state transition testing); white-box (statement and branch coverage); experience-based (error guessing, exploratory, checklist-based); collaboration-based approaches (user stories, acceptance criteria, ATDD).
  • 5. Test management: test plans; release and iteration planning; entry and exit criteria; estimation techniques; test case prioritisation; the test pyramid and testing quadrants; risk-based testing (likelihood × impact); monitoring, metrics and reports; configuration management; defect reports.
  • 6. Tools: tool categories and the benefits and risks of test automation.

Worked examples of the K3 techniques

Boundary value analysis (2-value). A field accepts ages 18 to 60. The boundaries are 18 and 60, and their nearest invalid neighbours are 17 and 61. Two-value BVA tests: 17, 18, 60, 61. Three-value BVA adds the values on each side: 17, 18, 19, 59, 60, 61.

Equivalence partitioning. For the same field there are three partitions: below 18 (invalid), 18–60 (valid) and above 60 (invalid). Minimum tests for 100% coverage: 3, one from each partition.

Decision table. Free delivery if the order is over ₹500 and the user is a member. Two conditions give 4 combinations (rules). Only one rule (over ₹500 = yes, member = yes) gives free delivery.

State transition. A login account goes from Active to Locked after 3 wrong passwords, and back to Active after a reset. Count the valid transitions in the diagram and design tests to cover each one (0-switch coverage). Also try invalid transitions, such as logging in while Locked.

Statement vs branch coverage. For if (x > 10) { y = 1 } with no else, the single test x = 11 gives 100% statement coverage but only 50% branch coverage. You also need a test where x ≤ 10. 100% branch coverage always gives 100% statement coverage, but not the other way round.

4-week study plan

WeekFocusPractice
1Chapters 1–3: principles, SDLC, test levels and types, reviewsMemorise the 7 principles; glossary flash cards
2Chapter 4: EP, BVA, decision tables, state transitions, coverage30 technique calculations against the clock
3Chapters 5–6: planning, estimation, prioritisation, risk, metrics, defect reports, toolsWrite a one-page test plan and two defect reports
4Official sample exams; review every wrong answer against the syllabusTwo timed sample exams; book the exam

15 practice questions with answers

These are original questions written for this guide, not exam questions.

1. Which testing principle says running the same tests repeatedly finds fewer new defects?
Tests wear out (formerly called the pesticide paradox).

2. Testing finds failures; what then finds and fixes the cause in the code?
Debugging.

3. Which test-first approach writes scenarios in Given-When-Then form with business stakeholders?
BDD (behaviour-driven development).

4. A fixed defect is retested to check it's really fixed. Which type of testing?
Confirmation testing (re-testing).

5. After the fix, the team checks nothing else broke. Which type?
Regression testing.

6. Which review type is the most formal, with defined roles and metrics, led by a trained moderator?
Inspection.

7. A discount applies to quantities 10–99. Using 2-value BVA, which values do you test?
9, 10, 99, 100.

8. A password must be 8–16 characters. How many equivalence partitions are there for length?
Three: fewer than 8 (invalid), 8–16 (valid), more than 16 (invalid).

9. A decision table has 3 independent yes/no conditions. How many rules does the full table have?
8 (2³).

10. A test suite gives 100% branch coverage. What statement coverage does it give?
100%.

11. Which technique relies on the tester's knowledge of past defects to target likely failures?
Error guessing.

12. A risk has high likelihood and high impact. What does risk-based testing suggest?
Test it earlier and more thoroughly than lower risks.

13. In the test pyramid, which layer should have the most automated tests?
The bottom: unit (component) tests.

14. Testing took 30% of development effort on similar past projects, so the team plans 30% again. Which estimation technique is this?
Estimation based on ratios. The syllabus also covers extrapolation, Wideband Delphi (Planning Poker is a variant) and three-point estimation.

15. Name two risks of test automation.
Unrealistic expectations, underestimating the effort to maintain scripts, and depending too much on a tool or vendor.

After CTFL

Cloud Soft Solutions in Ameerpet, Hyderabad teaches manual and automation testing, Selenium, API testing and AI-assisted QA with real-time projects. See the APEX program and all courses.

📞 Call +91 96660 19191 · WhatsApp · Flat No. 513, 5th Floor, Nilagiri Block, Aditya Enclave, Ameerpet, Hyderabad

Frequently Asked Questions

How many questions are in ISTQB CTFL v4.0?
40 multiple-choice questions worth 1 point each.

What is the CTFL pass mark?
26 out of 40 (65%).

How long is the CTFL exam?
60 minutes, or 75 minutes for candidates taking it in a non-native language.

Which CTFL chapter has the most questions?
Chapter 4, Test Analysis and Design, with 11 questions including 5 K3 (apply) questions.

Are there prerequisites for CTFL?
No. CTFL itself has no prerequisite, and it is required for ISTQB Advanced Level and many Specialist certificates.

Which CTFL topics need calculation?
The 8 K3 questions come from chapter 4 (test techniques such as BVA, decision tables, state transitions, coverage) and chapter 5 (test management).

Share𝕏inf✉
EnrollWhatsAppCall us