Skip to main content
Ameerpet, Hyderabad · Classroom & live online
Cloud Soft Solutions

CompTIA CloudNetX (CNX-001) Exam Guide 2026: 4 Domains, Hybrid Network Design, Zero Trust, Troubleshooting, 8-Week Plan and 15 Questions

CompTIA CloudNetX (CNX-001), the expert hybrid network architect certification launched 18 February 2025: up to 90 questions in 165 minutes, pass/fail scoring, 10 years of IT experience recommended. The four domains with weights, hybrid design patterns (VPN, interconnects, SD-WAN, SASE), a troubleshooting checklist, an 8-week plan and 15 questions.

CompTIA CloudNetX CNX-001 hybrid network architect exam guide 2026, Cloud Soft Solutions
Last updated · 5 min read · 1,077 words

CompTIA CloudNetX CNX-001 hybrid network architect exam guide 2026, Cloud Soft Solutions

CompTIA CloudNetX (CNX-001) is CompTIA's expert-level certification for hybrid network architects, launched on 18 February 2025. It checks that a senior engineer can design hybrid networks across on-premises and public cloud, secure them with zero trust, operate and automate them, and troubleshoot connectivity, performance and security problems. CompTIA recommends at least 10 years in IT, including 5 as a network architect, so this is a target for experienced network and cloud network engineers.

This guide follows CompTIA's official CloudNetX page: exam facts, the four domains with weights and skills, hybrid design patterns, a troubleshooting checklist, an 8-week plan and 15 original practice questions.

Quick facts (CompTIA, November 2026)

ItemDetail
Exam codeCNX-001 (V1)
Launched18 February 2025
QuestionsMaximum of 90, multiple-choice and performance-based
DurationMaximum of 165 minutes
ScoringPass/fail only, no scaled score
LanguageEnglish
Recommended experienceAt least 10 years in IT, including 5 years as a network architect, plus hybrid cloud experience; knowledge at the level of Network+, Security+ and Cloud+
RetirementCompTIA usually retires exams about 3 years after launch

Read the official CompTIA CloudNetX page and download the exam objectives before you book.

The four domains and weights

DomainWeightSkills (from CompTIA)
1. Network architecture design31%Addressing, routing, NAT and protocols; mesh, star and spine-and-leaf topologies; hybrid connectivity (VPN, SD-WAN, MPLS, public cloud); availability (load balancing, redundancy, autoscaling, CDNs); campus facilities (power, environment, physical access)
2. Network security28%Threats and mitigations; firewalls, encryption and NAC; firewall rules, security groups and URL filtering; zero trust (ZTNA, SASE, microsegmentation, CASB); SSO, MFA, PKI and privileged access; wireless security
3. Network operations, monitoring, and performance16%Operations management; metrics, dashboards, logging and alerting; IaC, automation tools and scripting
4. Network troubleshooting25%Connectivity (DNS, VPN, cloud interconnects); performance (latency, load balancing, packet loss); security issues (firewalls, unauthorised access, hybrid vulnerabilities)

Hybrid design patterns

NeedTypical design
Quick, encrypted link to the cloudSite-to-site IPsec VPN over the internet
Predictable bandwidth and latencyPrivate interconnect (AWS Direct Connect, Azure ExpressRoute, Google Cloud Interconnect) with VPN as backup
Many branches, mixed linksSD-WAN with central policy and path selection
Many VPCs or VNetsHub-and-spoke with a transit gateway or virtual WAN, shared security services in the hub
Remote users without a full VPNZTNA or SASE, with identity and device checks for each application
Data centre east-west trafficSpine-and-leaf fabric with microsegmentation
Global web performanceCDN and global load balancing with health checks

Plan IP addresses early: overlapping private ranges between on-premises and cloud networks are a common cause of failed hybrid designs.

Troubleshooting checklist

  1. Define the problem: who is affected, what fails, since when, what changed.
  2. Check name resolution: does the name resolve to the right address on both sides (split DNS, private zones)?
  3. Check the path: routes, BGP advertisements, route tables, NAT and asymmetric routing.
  4. Check filters: firewalls, security groups, network ACLs and NAC, in both directions.
  5. Check the tunnel or link: VPN phase 1 and 2, interconnect status, MTU and fragmentation.
  6. Check performance: latency, jitter, packet loss, load balancer health checks.
  7. Fix, verify, document and update monitoring so the issue is caught earlier next time.

8-week study plan

WeeksFocus
1–2Domain 1: addressing and subnetting, routing (OSPF, BGP), NAT, topologies, hybrid connectivity, availability
3–4Domain 2: firewalls, segmentation, zero trust, SASE, CASB, IAM, PKI, wireless security
5Domain 3: monitoring, logging, alerting, IaC and network automation with Python and Terraform
6–7Domain 4: troubleshooting scenarios; build a lab VPN between two cloud networks and break it on purpose
8Timed practice with performance-based tasks; book the exam

15 practice questions with answers

These are original questions written for this guide, not exam questions.

1. Which topology gives every leaf switch equal paths to every other leaf?
Spine-and-leaf.

2. Which routing protocol exchanges routes between on-premises and cloud over private interconnects?
BGP.

3. What problem do overlapping private IP ranges cause?
Routing conflicts, forcing NAT or redesign before networks can connect.

4. A private interconnect fails. How do you keep connectivity?
A backup site-to-site VPN with lower route preference.

5. Which technology chooses between links per application based on quality?
SD-WAN.

6. What is the core idea of zero trust?
Never trust by network location; verify identity, device and context for every access.

7. What does SASE combine?
Networking (such as SD-WAN) with cloud-delivered security (such as SWG, CASB, ZTNA and firewall as a service).

8. Which control limits traffic between workloads in the same network?
Microsegmentation.

9. Users reach a cloud app by IP but not by name. What do you check?
DNS resolution, including private zones and conditional forwarders.

10. Large transfers over a VPN stall while small ones work. What is a likely cause?
MTU or fragmentation issues across the tunnel.

11. Traffic leaves through one firewall and returns through another, and is dropped. What is this?
Asymmetric routing with stateful firewalls.

12. Which service improves global web performance by caching content near users?
A content delivery network (CDN).

13. Why manage network configuration as code?
Changes become repeatable, reviewable, versioned and easy to roll back.

14. Which CloudNetX domain has the most weight?
Network architecture design at 31%.

15. How is CloudNetX scored?
Pass/fail only, with no scaled score.

Before and after CloudNetX

Cloud Soft Solutions in Ameerpet, Hyderabad teaches cloud networking, security and DevOps with real-time projects. See the APEX program and all courses.

📞 Call +91 96660 19191 · WhatsApp · Flat No. 513, 5th Floor, Nilagiri Block, Aditya Enclave, Ameerpet, Hyderabad

Frequently Asked Questions

What is CompTIA CloudNetX?
CompTIA's expert-level hybrid network architecture certification (exam CNX-001), launched on 18 February 2025.

How long is the CloudNetX exam?
A maximum of 165 minutes, with up to 90 multiple-choice and performance-based questions.

How is CloudNetX scored?
Pass/fail only, with no scaled score.

Which CloudNetX domain has the most weight?
Network architecture design at 31%.

What experience does CompTIA recommend?
At least 10 years in IT, including 5 years as a network architect, plus hybrid cloud experience.

Is CloudNetX for freshers?
No. Freshers should start with Network+, CCNA or Cloud+.

Share𝕏inf✉
EnrollWhatsAppCall us