Skip to main content
Ameerpet, Hyderabad · Classroom & live online
Cloud Soft Solutions

CompTIA Server+ SK0-005 Exam Guide 2026: 4 Domains, RAID, Backups and DR, 5-Week Plan and 15 Questions

CompTIA Server+ (SK0-005): up to 90 questions, 90 minutes, pass mark 750. Four domains with weights, RAID levels compared, backup types and the 3-2-1 rule, DR site types, Windows and Linux commands, a 5-week plan and 15 practice questions.

CompTIA Server+ SK0-005 exam guide 2026, Cloud Soft Solutions
Last updated · 5 min read · 1,196 words

CompTIA Server+ SK0-005 exam guide 2026, Cloud Soft Solutions

CompTIA Server+ (SK0-005) is CompTIA's vendor-neutral certification for server and data centre administrators. It covers server hardware, RAID and storage, server administration on Windows and Linux, virtualisation and cloud basics, security, disaster recovery and troubleshooting. It suits IT support engineers moving into server, data centre and infrastructure roles, and it is one of the knowledge baselines CompTIA recommends before Linux+.

This guide follows CompTIA's official Server+ page: four domains with weights, RAID and backup tables, a 5-week plan and 15 original practice questions.

Quick facts (CompTIA, November 2026)

ItemDetail
Exam codeSK0-005 (V5), launched 18 May 2021
QuestionsMaximum 90, multiple choice and performance-based
Duration90 minutes
Passing score750 on a 100–900 scale
Recommended experienceCompTIA A+ or equivalent, plus two years of hands-on server experience

SK0-005 is older than most current CompTIA exams, so check the official CompTIA Server+ page for a newer version before you buy a voucher.

Domains and weights

DomainWeightKey topics (from CompTIA)
Server Administration30%Partitions, file systems and installation methods; IP addressing, DNS, DHCP and VLANs; server roles, monitoring, data migration and performance; clustering, load balancing and failover; virtualisation and cloud models; scripting basics; documentation and lifecycle
Troubleshooting28%Power, storage and connectivity faults; OS, application and patching errors; network latency and misconfiguration; security breaches; backup, recovery testing and failover validation
Security and Disaster Recovery24%Encryption, retention and data lifecycle; physical and environmental controls; accounts, MFA and permissions; malware prevention, DLP and SIEM; hardening; media destruction and decommissioning
Server Hardware Installation and Management18%Racking, cabling, power and cooling; RAID, shared storage and capacity planning; out-of-band management, firmware and hot-swap parts

RAID levels you must know

LevelMinimum disksSurvivesUsable capacityTypical use
RAID 0 (striping)2No disk failure100%Scratch space where speed matters and data is disposable
RAID 1 (mirroring)21 disk50%OS and boot volumes
RAID 5 (parity)31 disk(n−1)/nFile servers with mostly reads
RAID 6 (double parity)42 disks(n−2)/nLarge arrays where rebuilds take long
RAID 10 (mirror + stripe)41 disk per mirror pair50%Databases and write-heavy workloads

RAID is not a backup. It protects against disk failure, not deletion, ransomware or a site outage.

Backups and recovery

Backup typeCopiesRestore needs
FullEverythingThe last full backup
IncrementalChanges since the last backup of any typeThe last full plus every incremental since
DifferentialChanges since the last fullThe last full plus the latest differential
SnapshotPoint-in-time state of a volume or VMQuick rollback; not a substitute for off-site copies

Follow the 3-2-1 rule: three copies, on two kinds of media, one off-site (preferably offline or immutable against ransomware). Test restores regularly. A backup you've never restored is a guess.

Commands for both platforms

# Windows Server
Get-Disk; Get-Volume; Get-StoragePool
Get-Service | Where Status -eq Stopped
Get-WinEvent -LogName System -MaxEvents 20
Test-NetConnection fileserver01 -Port 445

# Linux
lsblk; cat /proc/mdstat; mdadm --detail /dev/md0
systemctl --failed; journalctl -p err -b
ip a; ss -tulpn; ping -c 3 gateway

5-week study plan

WeekFocusLab
1Hardware: racks, power, cooling, form factors, RAID, storage types (DAS, NAS, SAN), out-of-band managementBuild software RAID 1 and RAID 5 on a Linux VM; fail a disk and rebuild
2Administration: installs, file systems, server roles, DNS, DHCP, VLANs, virtualisation and cloudInstall Windows Server and Ubuntu Server; add DNS and DHCP roles
3High availability: clustering, load balancing, failover; scripting and documentationScript a daily disk-space report
4Security and DR: hardening, accounts and MFA, encryption, backups, DR sites, decommissioningBack up a VM, then restore it to a new VM
5Troubleshooting scenarios; performance-based question practice; mocksFix a failed service, a full disk and a wrong DNS entry; book the exam

15 practice questions with answers

These are original questions written for this guide, not exam questions.

1. Which RAID level survives two simultaneous disk failures with the least lost capacity?
RAID 6.

2. A database server needs the best write performance with redundancy. Which RAID level?
RAID 10.

3. Eight 2 TB disks are in RAID 5. What is the usable capacity?
14 TB (one disk's worth goes to parity).

4. A server is unresponsive and the OS is down. How do you reach its console remotely?
Out-of-band management (iLO, iDRAC, IPMI or a similar BMC).

5. A failed disk must be replaced without shutting the server down. What feature allows this?
Hot-swappable drive bays (with a redundant RAID level).

6. Full backup on Sunday, differentials Monday to Friday. The server fails on Friday afternoon. What do you restore?
Sunday's full backup and Thursday night's differential (the latest one).

7. The business can accept 4 hours of downtime. Which metric is this?
Recovery time objective (RTO).

8. A DR site has power, network and hardware but no current data. Which site type?
A warm site. A hot site is fully ready; a cold site has only space and power.

9. Old drives with customer data are leaving the data centre. What must happen first?
Secure sanitisation or physical destruction, with a certificate of destruction.

10. Two web servers share traffic and one fails without users noticing. What provides this?
A load balancer with health checks (an active-active configuration).

11. A new server can't reach other subnets but local hosts work. What do you check?
The default gateway, then the VLAN assignment of its switch port.

12. Which hypervisor type is used for production virtualisation hosts?
Type 1 (bare-metal), such as Hyper-V, ESXi or KVM.

13. A patch breaks an application on one server. What should have prevented this?
Testing patches in a staging environment and following change management, with a rollback plan.

14. The server room temperature is rising. Which controls apply?
Environmental monitoring with alerts, hot and cold aisle layout, and redundant cooling.

15. Why disable unused services on a server?
To reduce the attack surface (hardening).

After Server+

Cloud Soft Solutions in Ameerpet, Hyderabad teaches Windows Server, Linux, virtualisation and cloud with real-time labs. See the APEX program and all courses.

📞 Call +91 96660 19191 · WhatsApp · Flat No. 513, 5th Floor, Nilagiri Block, Aditya Enclave, Ameerpet, Hyderabad

Frequently Asked Questions

What is the current CompTIA Server+ exam code?
SK0-005 (V5), launched on 18 May 2021. Check CompTIA's page for any newer version before booking.

How long is the Server+ exam?
90 minutes, with a maximum of 90 multiple-choice and performance-based questions.

What is the Server+ passing score?
750 on a scale of 100–900.

Which Server+ domain has the most weight?
Server Administration at 30%, followed by Troubleshooting at 28%.

Is RAID a backup?
No. RAID protects against disk failure, not deletion, ransomware or site loss. Keep separate backups using the 3-2-1 rule.

What experience does CompTIA recommend for Server+?
CompTIA A+ or equivalent knowledge, plus two years of hands-on experience in server environments.

Share𝕏inf✉
EnrollWhatsAppCall us